For over 40 years, DAB has led the way in technologies in water movement and management globally.

DAB offers technological solutions to ensure reliability and efficiency, and optimize energy consumption in residential, commercial, agricultural and irrigation applications, putting people at the center of every action, strategy and development plan.

For this reason, DAB innovation means continuously creating simpler installations, uses and maintenance solutions for its products.


DAB E.SYBOX mini 3

Thanks to the technological know-how developed during more than 40 years, DAB PUMPS is proud to introduce to the market the E.SYBOX mini 3, this is the most compact electronic pressurization system in the world.


Revolutionary, integrated E.SYBOX mini 3  provides a new installation experience and maximum comfort during use. E.SYBOX mini 3  benefits from the most advanced DAB technologies to ensure a consistent pressure based on actual needs, and therefore an optimization of energy consumption. E.SYBOX mini 3 has a different appearance than any other booster set and is small and completely integrated. Once you install and use it, you realize that the real difference is in the comfort and performance.

E.SYBOX mini 3 uses the most advanced DAB technologies to create constant pressure according to the system demands and thus an optimization of energy consumption. The new 3-rotor model ensures further noise reduction and energy consumption.


Managing the water pressure in your home has never been so simple and quiet. E.SYBOX mini 3 is the DAB compact automatic booster system for the water supply of a single dwelling. E.SYBOX mini 3 guarantees the comfort of constant pressure (Pressure Set Point adjustable from 15 up to 79 psi) inside the system. Suitable for use with drinking water, in domestic systems, and in gardening applications.  E.SYBOXmini³ does not require any additional components for its installation.

TECHNICAL DATA

  • Operating range: capacity up to 22 gpm (80L/min); head up to 183 ft (56 m) – (80 psi)
  • Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, un-crystallized and chemically neutral.
  • Liquid temperature range: from 32°F to +95°F (0°C to +35°C) for domestic use for other use: from 32°F to +104°F (0°C to +40°C)
  • Maximum suction depth: 26 ft (8 m)
  • Maximum ambient temperature: +122°F (+50°C)
  • Maximum pressure: 108 psi (7.5 Bar)
  • Maximum settable pressure: 79 psi (5.5 Bar)
  • Motor protection rating: IPX4
  • Insulation class: F
  • Installation: Horizontal or vertical fixed position

Approvals:

  • CSA certification to CSA Standard C22.2 No 108- 14 Liquid Pumps
  • UL Standard 778- 5th Edition- Motor operated water pumps
  • NSF/ANSI 61 – 2014a – Drinking Water System Components – Health Effects
  • NSF/ANSI 372 – 2011 – Drinking Water System Components – Lead Content

Features

It consists of a high frequency self-priming double impeller pump, management inverter electronics, pressure and flow sensors, adjustable high resolution LCD display with 1/4 gallon built-in expansion vessel, and cartridge check valve. The double suction and delivery ports allow both vertical and horizontal installation.

Thanks to its compact sizes, installation is also possible in difficult places without high air exchange. The E.SYWALL wall bracket allows wall installation, saving even more room.

E.SYBOX MINI is a self-priming pump with a capability of 26 ft in less than 5 minutes. The water-cooled motor, the anti-vibration feet and the electronics, make this product totally comfortable and compact. Fitted with all the safety protections, as well as the protections for the safeguard of the pump. Particularly, the dry run and the antifreeze protections. All the parameters and the operating status are displayed & set on the high-resolution LCD display.

Advantages

Thanks to the technological knowledge gained during the past 40 years, DAB PUMPS is proud to introduce the E.SYBOX mini 3, the most compact and advanced booster pump system in the world. Revolutionary and complete, E.SYBOX mini 3 provides a new installation experience, whisper quiet running and maximum performance.

E.SYBOX mini 3 is the ideal solution to solve any water pressurization issues in residential environments. E.SYBOX mini 3 takes advantage of the most advanced DAB technologies, to ensure a consistent pressure based on actual demands, and therefore an optimization of energy consumption. Thanks to its versatility, E.SYBOX mini 3 can be installed anywhere, even under the kitchen sink.

Benefits

  • Guaranteed Consistent Water Pressure
  • Ultra Low Noise
  • No Vibrations
  • Easy to Adjust
  • Equipped with a Large Display
  • Extremely Compact Sizes
  • Quick to Install, Vertical or Horizontal
  • Reduced Energy Consumption
  • Easy Maintenance

For more information, download the ESYBOX MINI 3 –  DATA BOOKLET.


DAB E.SYBOX

E.SYBOX is an integrated electronic water booster system for domestic and residential use. The E.SYBOX inverter system provides the comfort of constant water pressure, while saving energy too. Suitable for use for potable water, in domestic plants for gardening and irrigation. Suitable for creating groups of up to 4 pumps. E.SYBOX requires no additional components for installation.

TECHNICAL DATA

  • Operating range: capacity up to 32 gpm; head up to 210 ft.
  • Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, un-crystallized and chemically neutral.
  • Liquid temperature range: from 32°F to +95°F for domestic use or from 32°F to +102°C for other uses
  • Maximum suction depth: 26 ft
  • Maximum ambient temperature: +102°F
  • Maximum withstandable pressure: 118 psi (8 bar / 800 kPa)
  • Motor protection rating: IPX4
  • Insulation class: F
  • Installation: Horizontal or vertical fixed position
  • Power Supply: 230v50-60Hz

For more information, download the ESYBOX – BROCHURE.

This image has an empty alt attribute; its file name is buy-now-lazada2.gif

DAB E.SYBOX MAX

E.SYBOX MAX is an integrated pumping system for pressurization in commercial building service. Available in two power sizes, it consists of modular elements that allow different configurations to cover the needs of medium/large condominiums and high buildings (even over 14 floors).


Each unit consists of the single, double or triple connection base and the pumping units; a four-pumps system is available with the additional kit to
connect two double bases.


The modular construction allows to assemble the pumping groups directly at the installation site (O.S.A. concept). The silence and compactness of dimensions allow installation in all rooms, even inhabited.

CONSTRUCTION FEATURES OF THE PUMP
Electronic vertical multi-impeller pump, with display, pressure sensors on intake and delivery, non-return valve on delivery and an integrated expansion tank. Pump body and impellers in techno-polymer with steel jacket.

CONSTRUCTION FEATURES OF THE MOTOR
Water-cooled permanent magnet motor, stainless steel motor jacket. Motor shaft in AISI 303 stainless steel.

CONSTRUCTION FEATURES OF THE ELECTRONIC
The variable frequency drive keeps the pressure constant by varying the number of motor revolutions according to the request.


The expansion module (ESY I/O, available as an accessory) makes it possible to interface E.SYBOX Max with the other elements of the system (BMS).

Integrated protections: protection from dry running, amperometric and abnormal voltages, overheating, freezing, anti-blocking and anti-cycling.

WORKS WITH DCONNECT
It is possible to configure and view the operating parameters on the large E.SYBOX MAX display or thanks to the DConnect app and the integrated Wi-Fi module, it is possible to do it remotely with an active DConnect service (an Internet connection is required).

From a smartphone or a tablet it is possible to control and manage system pressure, alarms and check the instantaneous and historical consumption.
With DSync technology, the user experience of E.SYBOX MAX is simplified. Using their smartphone or tablet, the installer interfaces with the pump that automatically detects the language, the time and the unit of measurement used in the Country of installation. In the case of a booster set, once the installation of the first pump is completed, the E.SYBOX MAX automatically synchronize the other pumps. The DSync also allows you to connect the pump to the outside world, through the Modbus protocol.

TECHNICAL DATA

  • Flow rate: Up to 76 gpm (17,4 m3/h) For single unit
  • Head: 370 ft (113 m)
  • Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, non-crystallized and chemically neutral
  • Liquid temperature: +122°F (50°C)
  • Maximum ambient temperature: +131°F (55°C)
  • Maximum inlet pressure: 72psi (5 bar)
  • Operation pressure: 174psi (12 bar / 1200 kPa)
  • Constant pressure range: 15-174 (1-12 bar )
  • Pre-set Pressure: 45psi (3 bar)
  • Motor protection class: IP X5
  • Motor insulation class: F
  • Impeller material: Technopolymer
  • Single phase power input: 208-240V 50/60Hz
  • Three phase power input: 380-480V 50/60Hz
  • Type of installation: Fixed in vertical position
  • Certification: ( pending approval )
  • CSA C22.2 No. 108-14- 5th Ed. – Liquid Pumps.
  • UL 778 6th Ed. – Motor Operated Water Pumps
  • NSF 61 Drinking Water
  • NSF 372 Drinking Water – Low Lead Content

For more information, download the ESYBOX MAX – BROCHURE.


DAB E.SYDOCK

E.SYDOCK is used to be able to mount 1 Qty E.SYBOX’s.

For systems where you want to pipe up the system now and install the pump later or where you want to be able to change the pump easily or remove it for the winter.

The suction and discharge 1″ ¼ NPT connection can be made at either side of the dock or on the same side to make piping up the dock as easy as possible.

For more information, download the E.SYDOCK –  DATA BOOKLET.


DAB E.SYTWIN

DAB ESYTWIN is used to be able to mount two (2) E.SYBOX units side by side for systems where either a larger flow or a where stand-by pump is required.

The suction and discharge 1″ ¼ NPT connection can be made at either side of the dock or on the same side to make piping up the dock as easy as possible.

Benefits:

  • Increasing Capacity
  • Increasing the Reliability
  • Wireless Capabilities

The E.SYBOX’s can comunicate with each other without a cable, by means of Wireless Communications of up to four (4) E.SYBOX’s that can talk to each other to allow for easy set-up and duty rotation.

The whole pump is mounted in a sound-proof closed ABS housing.

Thanks to the inverter and synchronous motor e.sybox there will be a huge energy saving with no pressure surges and less stress on pipes & fittings.

For more information, download the E.SYTWIN –  DATA BOOKLET.


DAB E.SYWALL

Complete wall mounting kit with brackets, screws, dowels, and two spacers for shock absorption.

Suitable for both DAB E.SYBOX and DAB E.SYBOX mini 3

For more information, download the E.SYWALL –  DATA BOOKLET.


DAB ACTIVE DRIVER PLUS

Active Driver Plus are inverters used for the control of hydraulic pumps. Their obvious fields of application are domestic, industrial, and agricultural constant pressure pumping systems.

The OLED display offers an extremely simple and intuitive graphic interface. Displaying or changing any parameters is extremely simple, which in turn also simplifies maintenance.

Installation is also very easy: the installation wizard asks the user for the parameters required for the configuration.

Active Driver Plus inverters provide a reduction of electric consumption, thanks to the inverter technology, whilst at the same time ensuring maximum comfort thanks to the constant pressure. They are extremely versatile, as they do not require external sensors and non-return valves. There is in-fact a built-in pressure sensor, a flow switch, and a non-return valve.

ADVANTAGES

  • Comfort, thanks to the constant pressure
  • Energy Savings, Thanks to Inverter Technology.
  • Less Noise,
  • Compact Shape,
  • Built-in Protections: Dry Run, Overload, Abnormal Voltage, Overtemperature, Freezing
  • Compatible with DConnect

TECHNICAL DATA

  • Line voltage: 115V and 230V single-phase/400V three-phase
  • Electric pump voltage: 115V and 230V single-phase, 230V and 400V three-phase
  • Power  supply frequency: 50 Hz – 60 Hz.
  • Installation: vertical and horizontal (M/M and M/T only)
  • Maximum liquid temperature: 50°C.
  • Max operating temperature: 60°C.
  • Max flow rate: 15m3/h
  • Maximum working pressure: 13 bar
  • Pressure regulation range: from 1 to 13 bar
  • Suction diameter (DNA): 1 1/4” male
  • Delivery diameter (DNM): 1 1/2” female
  • Protection level: IP55
  • Communication interface for sets: YES, an Active Driver Plus for each pump
  • Non-return valve not required

For more information, download the ACTIVE DRIVER PLUS – BROCHURE.


DAB E.SY I/O

The ESY I/O is an electronic expansion module that allows ESYBOX MAX to interface with the external input/output devices (eg: float switch, pressure switch, remote alarm) and with the BMS world (Building Management System).

For more information, download the CMBE – DATA SHEET.


DAB MCE-P

DAB MCE/P is the leading edge of the DAB Inverters family and are ideal for professional and very severe applications. They can drive pumps of up to 15 kW (~20Hp). These units combine the simplicity with the robust design and power of an inverter drive.

MCE/P are mounted on the pump, and are equipped with pressure sensors and the optional flow sensors as required. The use of a flow sensor, moreover, allows a better pressure regulation.

The MCE/P can easily be set up in booster sets, thanks to a standard wire cable connection.

Comfort, energy saving, protections and simplicity are the keywords of this professional series.

The MCE/P units are air cooled. Compatible with DConnect.

For more information, download the MCE-P –  DATA BOOKLET.


DAB EBOX

DAB EBOX plus is an electronic control panel for the protection and automatic operation of one or two submersible pumps or pressurizing both single-phase and three-phase, installed in domestic, civil and industrial environments.

DAB EBOX basic is an electronic control panel for the protection and automatic operation of one or two electronic submersible pumps or single-phase pressurization for domestic applications.

Nominal tension of power supply:

  • DAB EBOX Plus 1x 230 V / 3 x 230 V – 3 x 400 V (automatic selection)
  • DAB EBOX Basic 1x 230 V
  • Frequency: 50 – 60 Hz

Maximum use of power: 

  • DAB EBOX Plus 5.5 kW + 5.5 kW
  • DAB EBOX Basic 2.2 kW + 2.2 kW
  • Maximum use of current: 12 A + 12 A
  • Starting capacitor:  KIT supplied as an accessory
  • Limits of use ambient temperature: -10° C + 40° C
  • Limits of storage temperature:  -25° C + 55° C
  • Relative humidity to the air: 90% a 20° C
  • Max altitude max: 1000 s.l.m.
  • Degree of protection: IP 55

For more information, download the EBOX –  DATA BOOKLET.


DAB EUROSWIM Pool Pumps

High performance self-priming centrifugal electric pumps with built-in high capacity pre filter. Motor completely isolated from the water. Extremely quiet and highly reliable, developed for water circulation and filtration in domestic and residential swimming pools. Also suitable for specific applications requiring handling of aggressive liquids in the fishing, agricultural, and industrial sectors.

E.SYBOX is an integrated electronic water booster system for domestic and residential use. The E.SYBOX inverter system provides the comfort of constant water pressure, while saving energy too. Suitable for use for potable water, in domestic plants for gardening and irrigation. Suitable for creating groups of up to 4 pumps. E.SYBOX requires no additional components for installation.

TECHNICAL DATA

  • Operating range: up to 186 gpm (42 m3/h) with head of up to 72 ft  (22 m)
  • Pumped liquid temperature range: up to 140°F  (60°C)
  • PH Range: 6, 5-8, 4
  • Self-priming: up to 6 ft (2 m) (without check valve)

For more information, download the CM – DATA BOOKLET.


DAB Jet

The DAB Jet is a centrifugal self-priming pump complete with ejector and diffuser for high priming capability, most suitable for suctioning from wells up to 9 meters. Pump is manufactured using cast-iron, stainless steel and techno-polymer materials to ensure long use and toughness.

TECHNICAL DATA

  • Flowrate: Up to 80 LPM
  • Head: up to 62 meter
  • Self-Priming: up to 9 meters
  • Working Pressure: 8 bar
  • Max. Liquid Temperature: 40°C

For more information, download the SBA – DATASHEET.

This image has an empty alt attribute; its file name is buy-now-lazada2.gif

For more information, please contact us using the form below.

 

  •